I need help setting up a wirelees network with a Window 2000 PC as the host?
September 29th, 2009 | by switch |
soriku1989 asked:
I’ve 2 computers and I need to figure out how to get my upstairs computer which is running WINDOWS 2000 to work with my downstairs computer that is running WINDOWS XP. VERIZON supplied me with a WESTELL VERSALINK MODEL 327W ROUTER/MODEM COMBO but i’ve no idea how to access the ROUTER part of it. I also have a LINKSYS WIRELESS G BROADBAND ROUTER with a 4-POINT SWITCH MODEL WRT45G. On my downstairs computer(the XP one) I have A WIRELESS-G PCI ADAPTER with SPEEDBOOSTER I have the hardware for the most part but I DON’T have any of the INSTALLATION DISKS. Please someone help me set up my wireless network.
COURTNEY
I’ve 2 computers and I need to figure out how to get my upstairs computer which is running WINDOWS 2000 to work with my downstairs computer that is running WINDOWS XP. VERIZON supplied me with a WESTELL VERSALINK MODEL 327W ROUTER/MODEM COMBO but i’ve no idea how to access the ROUTER part of it. I also have a LINKSYS WIRELESS G BROADBAND ROUTER with a 4-POINT SWITCH MODEL WRT45G. On my downstairs computer(the XP one) I have A WIRELESS-G PCI ADAPTER with SPEEDBOOSTER I have the hardware for the most part but I DON’T have any of the INSTALLATION DISKS. Please someone help me set up my wireless network.
COURTNEY
3 Responses to “I need help setting up a wirelees network with a Window 2000 PC as the host?”
By mdigitale on Sep 30, 2009 | Reply
ALFRED
You don’t need any installation disks. To configure your router, connect it to your computer using a network cable — then type in
By Charles on Oct 2, 2009 | Reply
CLAUDE
hi i think u can use these links
Hope this well help u better
Try this too… this link will help u better…
By Colinc on Oct 4, 2009 | Reply
BRUNO
You can only use 1 router on the connection. You must read the manual for whichever you are going to use, connect it by cable to a lan port and use the web interface configuration. Then set up the wireless. Any wireless card you have must have it’s drivers installed before it will work.